Kitchen Cabinet Refacing

Kitchen cabinet refacing saves thousands over replacing all the cabinetry. Doing the job yourself saves even more money. Labor is a significant percentage of the total cost of refacing. You could save up to half the price by saving on the labor costs. While it isn’t an easy task, it is possible for a skilled homeowner.

Do it Yourself or Hire a Pro?

Kitchen cabinet refacing is a big job. You will need some skills and experience in home remodeling to tackle the job. It can be stressful, if you aren’t sure of yourself. Refacing isn’t a job that should be rushed. You need to have patience and the time to invest to do the job right.

Precise measurements are needed when attempting to give your home a makeover with cabinet refacing. Measuring is one of the most important parts of the job. It must be exact on the door openings, face frame and ends of the cabinets. Also accurate measurements are needed for the doors and drawer fronts. If you are off by even a little bit, the material won’t fit right.

Time should be taken to prepare all surfaces for refacing. You will need to remove all the cabinet drawers and drawer fronts. Clean all surfaces to remove dirt and grease. You will then need to roughen the surfaces to prepare them to hold the materials. This part of the kitchen cabinet refacing job shouldn’t be rushed and steps should not be skipped.

If you don’t have the skills, time or patience, it’s best to hire a professional to do the job for you. Attempting a big job like this is very stressful. If you don’t take the time to do the job right, it could end up costing you more in the long run.

Kitchen Cabinet Refacing Supplies & Tools

Cabinet refacing supplies are available on the internet. Many sites offer tutorials with step by step instructions and pictures to help you do the job. There are a variety of tools to help you do a professional job at home.

Pressure sensitive veneer is the easiest material for the do-it-yourself handyman who wants to do his or her own kitchen cabinet refacing. This material is easy to use and has a paper backing that peels off. Line up the veneer to the surface and apply pressure to hold it in place. The surface will need to be prepared well before the veneer is applied. Solid wood veneer is the easiest to work with and is the best quality material for this job.

A veneer roller can be used to apply pressure to the material. These come in small and large sizes and give good pressure. The larger size covers more area. Always start at the center and go outward. This removes air bubbles that can ruin the look of the veneer.

A smoothing blade can be used to press down when attaching the veneer. Start at the center and slide in the direction of the grain. Use both hands to give sufficient pressure. Repeat until firmly attached.

Edge band iron and edge trimmers are useful for finishing. The band iron is used to attach the band to the edge of the cabinet doors. A clothes iron can also be used for this job, but will be larger and more bulky to work with.

In conclusion, it is up to you whether or not you want to do kitchen cabinet refacing yourself, or hire a professional to do it. Hopefully this article gives you enough information to aid in your decision.

Decorating Your Kitchen On A Budget

Are you bored with your kitchen? You don’t necessarily need to spend thousands of dollars to give it a little face lift. Just follow these tips and you’ll make big changes on a little budget. Of course, if you are looking for a full scale kitchen remodel, Kitchen Cabs Direct is one of the top kitchen remodeling companies in the state of New Jersey.

Need a colorful window treatment? Simply purchase an inexpensive basswood shade and paint it in a bright color. You can use a partially dry brush and paint randomly for an aged look.

Paint your walls a bright, sunny yellow and randomly paint over a few areas with a deeper yellow, a dark peach, and terra cotta. Mix the paints with a glazing liquid and wipe each coat with a wet cloth before the paint dries.

Paint your old cabinets with a few layers of paint using a dry brush. You can purchase pin stripe tape for automobiles and apply it just under the molding for an attractive accent.

Using a fabric panel with hook-and-loop fastening tape to create skirting around your under-counter areas. You can cover aging appliances such as dishwashers and worn cabinets with a colorful new curtain that hangs from underneath the edge of your counter tops.

Use your mismatched dishes and cups to decorate a stylish shelf hanging on your kitchen wall. Brightly colored dishes and hanging teacups make cute decorations.

Use your treasured family photos to decorate a shelf or nooks. You can use cheap picture frames and a cute shelf as an expression of your home and your life.

If your counter tops are not what they once were, remove the old surface and replace it with colorful, mismatched tiles you can purchase for next to nothing at a discount home store. If your counter tops are uneven, use a piece of plywood to even out the surface before you put down the tiles.

If your refrigerator has seen its better days, have a local supplier cut chalkboard to fit the front and glue it directly to the surface of your refrigerator. Use pine boards to make a border and you will have your own personal note center right on your refrigerator.

Decorating your kitchen need not be expensive. With a little imagination and a little work you can turn even the most boring kitchen into a work of art. Colorful curtains and paint will make a huge difference in any kitchen. No matter how small or dark the space may be.

Bathroom Remodeling Tips

If you’re building or remodeling your home, the bathroom is one space you can’t afford to overlook. Bearing in mind how much time you spend in this room, you absolutely want that space to be at ease, useful and good-looking as possible. This article will give you some bathroom remodeling tips on design fundamentals that go into a bathroom decor.

After your bathroom remodeling has been finished by a quality bathroom renovation contractor, here are some quick tips to give your bath a distinctive look. Add a simple detail, such as a picture rail or shelf along one wall, to display framed prints or small figurines.

Fill antique bowls or shaving mugs with pretty toiletries, such as soaps or bath salts. If you have room, consider adding a piece of outdoor furniture like a woven chair or table. Add accent lighting to your bathroom remodeling, like a low-voltage strip of lights around the top edge of the wall tile.

Draw attention to the ceiling with ornamental wood beams. Line an entire wall with mirrored cabinets. They will make the room look considerably more open. Instead of paint, try a colored stain to revitalize wood cabinets. Mix and match colors by using a light-colored stain for the backdrop and then apply a brighter color to some of the drawers. Add bright flowers or flowering plants to the room.

Look for unusual vessels, such as wall vases, old watering cans or window boxes to hold your favorite plants. Attach a beveled mirror to the wall over the sink and frame it with tiles. You can use a selection of mix-and-match tiles or try some colorful styles.

Cabinet Refacing – A Popular Alternative To Replacing

When remodeling your kitchen, an alternative to replacing your cabinets entirely, is to use the kitchen cabinet refacing option. With cabinet refacing, you can achieve a beautiful new kitchen while spending half the amount of money. You will literally be giving your cabinets a face-lift!

In the refacing process, existing doors, drawer fronts and hardware are removed and replaced with new ones. For cabinet doors, a wide variety of veneers and laminates are available to cover old surfaces. Other noticeable surfaces such as cabinet ends and frames are finished to match. Cabinet interiors are either refinished or repainted. Cabinet refacing is available in a variety of styles, materials and colors.

Neither the kitchen layout nor the amount of space available is affected by refaced cabinets. Doors, drawer fronts, and hardware are refaced and then put right back into their previous place, leaving your current arrangement untouched. A beautiful new look will be created, but you will still be standing in the same kitchen. If you are looking for a more drastic change, consider installing a few new cabinets to alter the look a bit more. In addition, new pull out or swivel shelves can also be installed to enhance the appearance and feel.

Find a Kitchen Cabinet Refacing Contractor

One of the most important factors in refacing your cabinets is that you find a licensed contractor. Getting a contractor that is licensed and bonded means that you will receive quality work without some of the hassles of hiring someone not qualified. Make sure you shop around and get multiple quotes. Contractors typically have different rates depending on the number of employees that will be working on your project. By getting multiple bids you can lower your cost and find a contractor you are comfortable

Not only does refacing cabinets improve the overall look of your kitchen, but it also greatly improves the durability of your cabinets. It helps protect and lengthen the life of your existing cabinetry, adding overall worth to your home.

How to Use Concrete in a Traditional Kitchen

Concrete’s use in kitchens and bathrooms may still be considered relatively “modern” design-wise by some homeowners. But while concrete can be used to create a modern or minimal look, it’s also perfectly adaptable to a more traditional setting – where it was so extensively used in the first place.

Concrete can act as a substitute for more traditional materials. Rather than just using concrete to explicitly re-create something from the past, you can also combine it with other elements to suggest a timeless quality. In my work, I always strive to strike a balance between innovation and emotion, between spare contemporary and warm traditional. Adding mosaic tile along the front edge of a concrete surface, inlaying bits of tile along a backsplash, or even embedding a fossil in a countertop all connect us to the past.

Let’s take a turn-of-century “Craftsman” style kitchen for a hypothetical example. The cabinets would most likely be frame-and-panel with flush inlay doorframes. There would be wood wainscoting in the dining area and perhaps tile around a single porcelain sink. The lighting fixtures might have beveled glass or echoes of Tiffany lamps. What concrete application would be appropriate in this situation?

I would look into one or more of the following ideas in combination:

  • Choose an earth tone color or natural gray. No bright colors.
  • Keep the front face, or thickness, of the countertop at a minimum of 2-1/2″ up to 5″.
  • Inset “panels” into the front face of the countertop to reflect the cabinet doors. These panels would be no deeper than 3/8″ and would measure approximately 1/3″ to the height of the front face, or
  • Recess the appropriately sized or proportioned ceramic tiles with some embossing on them into the face of the countertop or into a cast backsplash.
  • Allow the recess to be at least 1/4″ in depth.
  • Mosaic tiles in groups of four separated by 1/8″-1/4″ spacing could be placed on the countertop surface as inlaid “trivets” next to the stove burners. (In the mold, they would be placed face down on the bottom of the form.)
  • Line the drain board into the sink with tile or marble.

Now I wouldn’t want to use all of the above accents – just enough to carry a complementary flavor to the Craftsman look and feel. The concrete itself is earthy enough to carry that load. It’s up to you as a homeowner or designer to add the touch that personalizes and enhances the piece. In some cases, for instance, the overwrought “traditional English manor” kitchen, usually full of elaborate detailing, can use a touch of restraint – the concrete counter with a simple ogee edge detail and a complementary white porcelain farm sink might just be perfect.

As they say, it’s all in the details.

Need Assistance! Phone (201) 655-2240 Line Showroom: 269 PARKER AVENUE CLIFTON, NJ 07011